Anritsu MS2687B Manuel d'utilisateur télécharger pdf (Page 16)

Single search: AUTO TUNE, PEAK

→

CF, PEAK

→

REF, SCROLL

Zone marker: NORMAL, DELTA

Marker

Marker functions: MARKER

→

CF, MARKER

→

REF, MARKER

→

CF STEP SIZE,

∆ MARKER

→

SPAN, ZONE

→

SPAN

Peak search: PEAK, NEXT PEAK, MIN DIP, NEXT DIP

Multi marker: 10 max. (highest 10, harmonics, manually set)

Noise power: dBm/Hz, dBm/CH, dBµV/√

–

C/N: dBc/Hz, dBc/CH

Occupied bandwidth: power N% method, X-dB down method

Adjacent channel leakage power

Measure REF: total power/reference level/in-band level method

Display: channel designate display: (3 channels x 2), graphic display

Average power within burst signal: average power in the designated range of time domain waveform

Template comparison (at time sweep): upper limit x 2, lower limit x 2

MASK (at frequency sweep): upper limit x 2, lower limit x 2

Correction Frequency response can be corrected arbitrarily up to 150 points

Display Color TFT-LCD, VGA 17 cm (6.5 type)

Color Number of colors: 4096, RGB, each 16-scale settable

Intensity Settable in 5 steps (display off included)

Contents Scale, waveform data, setting condition, menu, title

Save/recall Saves and recalls setting conditions and waveform data to internal memory (max. 12) or memory card

Hard copy

Displayed data can be hard-copied with the printer via parallel interface

(PCL level 3 or lower, or ESC/P-J83, J84 compatible models only)

GPIB

Meets IEEE488.2. Controllable with external controller (except for power switch)

Interface function: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2

Parallel interface

Centronics-compatible, outputs print data to printer, D-sub 25 pin connector (jack)

Data line exclusive for output: 8, Control line: 4 (BUSY,

_____

DTSB,

_____

ERRO

R, PE)

PC card interface

Saves and recalls setting condition and waveform data, Memory card accessible (3.3/5 V),

Connector: Type Ι or Type ΙΙ of PC card

RS-232C

Controllable with external controller (except for power switch)

Baud rate: 1200, 2400, 4800, 9600, 19.2 k, 38.4 k, 56 k, 115 kbps

Input connector: K-J, 50 Ω nominal value,

Impedance: VSWR ≤2.3 Typical (RF ATT ≥10 dB)

Video output: outputs analog RGB, D-sub 15-pin connector (jack)

IF output: BNC connector, 50 Ω nominal value, 66/10.69 MHz,

Level: –10 dBm Typical, (frequency 50 MHz, display scale upper edge, 50 Ω terminated)

Broadband IF output: BNC connector, 50 Ω nominal value, 60.69/66 MHz

Gain: 0 dB Typical (50 MHz, RF ATT: 0 dB, for RF input level)

Video output (Y): BNC connector

Level: 0 to 0.5 V ± 0.1 V Typical (log scale), 0 to 0.4 V ± 0.1 V Typical (linear scale),

(50 MHz, from upper edge to lower edge at 10 dB/div or 10%/div, 75 Ω terminated)

Input/output connector Buffered Output: BNC connector,

Level: 2 to 5 V (p-p) (200 Ω terminated)

Sweep Output (X): BNC connector,

Level: 0 to 10 V ± 0.1 V (≥100 kΩ termination, from the left edge to the right edge of the display scale,

single band sweep)

Sweep Status Output (Z): BNC connector,

Level: TTL (low level at sweep)

Probe source: 4-pole connector, +12 V, –12 V, ±10% each, 110 mA max. each.

Trig/Gate input: BNC connector, level: ±10 V (0.1 V resolution), or TTL level

External reference input: BNC connector,

Frequency: 10 MHz ± 10 Hz, 13 MHz ± 13 Hz, level: ≥0 dBm

External mixer Frequency range: 18 to 110 GHz, For the details, refer to the last page.

Dimensions, weight 320 (W) x 177 (H) x 411 (D) mm (handle, leg, front cover, fan cover excluded), ≤16 O (nominal value)

Power

100 to 120/200 to 240 Vac (–15%/+10%, 250 V max., wide range input)

47.5 to 63 Hz, ≤400 VA

Ambient temperature and 0˚ to +50˚C, RH ≤85%

humidity (no condensation allowed)

Storage temperature range –20˚ to +60˚C

EMC

EN61326: 1997/A2: 2001 (Class A)

EN61000-3-2: 2000 (Class A)

EN61326: 1997/A2: 2001 (Annex A)

LVD EN61010-1: 2001 (Pollution Degree 2)

MS2687B Specifications

FunctionsOthers

1 2 ... 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Anritsu MS2687B Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Anritsu MS2687B