Anritsu S113C Guide de l'utilisateur Page 55
- Page / 120
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Site Master and Spectrum Analyzer Modes
Save and Recall a Setup
Saving a Setup
Saving a setup configuration in memory will preserve the calibration information.
Step 1. To save the configuration in one of the 10 available user setup locations, press
SAVE SETUP .
Step 2. Use the key pad or the Up/Down arrow key to select a location (1 - 10).
Step 3.
Press ENTER to save the setup.
NOTE: A manual calibration setup will be saved with an OSL designator. An
InstaCal setup will be saved with an ICAL designation.
Recalling a Setup
The following procedure recalls a setup from memory.
Step 1.
Press the RECALL SETUP key.
Step 2. Select the desired setup using the Up/Down arrow key.
Step 3.
Press ENTER to recall the setup.
Save and Recall a Display
Saving a Display
The following procedure saves a display to memory.
Step 1.
Press the SAVE DISPLAY key to activate the alphanumeric menu for trace
storage.
Step 2. Use the soft keys to enter a label for the saved trace.
For example, to save a display with the name “TX1 RETURN LOSS” press the
soft key group that contains the letter “T” then press the “T” soft key. Press the
soft key group that contains the letter “X” then press the “X” soft key. Press the
number “1” key on the numeric keypad. Use the softkeys and keypad as neces-
sary to enter the entire name, then press ENTER to complete the process.
NOTE: More than one trace can be saved using the same alphanumeric name,
as traces are stored chronologically, using the time/date stamp.
Recalling a Display
The following procedure recalls a previously saved display from memory.
Step 1.
Press the RECALL DISPLAY key.
Step 2. Select the desired display using the Up/Down arrow key.
3-12
Chapter 3 Getting Started
- Site Master 1
- S113C, S114C 1
- S331C, and S332C 1
- Antenna, Cable and 1
- Spectrum Analyzer 1
- WARRANTY 3
- LIMITATION OF WARRANTY 3
- TRADEMARK ACKNOWLEDGMENTS 3
- Table of Contents 5
- Chapter 3 - Getting Started 6
- Chapter 6 - Power Measurement 8
- Chapter 7 - Software Tools 8
- Appendix A - Reference Data 8
- Appendix B - Windowing 8
- Chapter 1 9
- General Information 9
- Printers 10
- Optional Accessories 11
- Performance Specifications 12
- Chapter 1 General Information 13
- Preventive Maintenance 14
- Calibration 14
- Annual Verification 15
- ESD Precautions 15
- Chapter 2 17
- Functions and Operations 17
- Front Panel Overview 18
- Function Hard Keys 19
- Keypad Hard Keys 20
- Soft Keys 22
- MODE=DTF: 23
- SOFTKEYS: 23
- FREQ/DIST 23
- AMPLITUDE 23
- MODE=SPECTRUM ANALYZER: 24
- Power Monitor Menu 34
- Self Test 35
- Error Codes 35
- Description 36
- Self Test Error Messages 36
- Range Errors 37
- InstaCal Error Messages 38
- Battery Information 40
- BATTERY INDI 41
- Battery Life 42
- 2-27/2-28 43
- Chapter 3 44
- Getting Started 44
- Site Master Mode 45
- Calibration Verification 46
- Figure 3-2. Calibration Setup 47
- InstaCal Module Verification 48
- Site Master S332C 49
- Setting the Scale 50
- Auto Scale 50
- Amplitude Scale 50
- Spectrum Analyzer Mode 52
- Selecting Sweep Parameters 53
- Adjusting Attenuator Settings 54
- Save and Recall a Setup 55
- Save and Recall a Display 55
- Changing the Units 56
- Changing the Display Language 56
- Adjusting Markers 56
- Adjusting Limits 56
- Setting the System Language 58
- Setting the System Impedance 58
- Printing 59
- Printer Switch Settings 60
- Using the Soft Carrying Case 61
- Chapter 4 62
- Cable & Antenna 62
- Measurements 62
- MODE key 64
- Insertion Loss Measurement 65
- ´ Length (ft) = Loss (dB) 66
- Resolution 70
- MARKER key 71
- 4-11/4-12 72
- Chapter 5 73
- AUTO mode, as the 74
- MANUAL) mode, the 74
- AM/FM Modulation 75
- Frequency Modulation 76
- Field Strength Measurements 78
- Creating a Spectral Mask 79
- EDIT and enter the 80
- EDIT when done 80
- Trace Overlay 81
- Occupied Bandwidth 82
- Channel Power Measurement 84
- GSM Channel Power Measurement 84
- Procedure 85
- Adjacent Channel Power Ratio 87
- Measurement Applications 89
- OUT OF BANDOUT OF BAND 95
- In-band Spurious Measurement 97
- Required Equipment 97
- Field Strength 99
- Antenna Calculations 100
- 5-29/5-30 101
- Power Measurement 102
- Chapter 6 102
- Chapter 7 104
- Software Tools 104
- Installation 105
- Using Software Tools 106
- Plot Capture to the PC 107
- Plot Upload to the Instrument 107
- Plot Properties 107
- Trace Overlay or Plot Overlay 108
- Saving Traces 109
- Creating a Database 110
- Printing Formats 110
- Uploading Antenna Factors 111
- 7-9/7-10 112
- Appendix A 113
- Reference Data 113
- Appendix A Reference Data 114
- Appendix B 116
- Windowing 116
- Appendix B Windowing 117
Produits connexes et manuels pour Mesure, test et contrôle Anritsu S113C
(5 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.053 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels