Anritsu S113C Guide de l'utilisateur Page 44
- Page / 120
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Chapter 3
Getting Started
Introduction
This chapter provides a brief overview of the Anritsu Site Master. The intent of this chapter
is to provide the user with a starting point for making basic Return Loss and Spectrum Ana
-
lyzer measurements. Procedures that are specific to Site Master mode (page 3-2), Spectrum
Analyzer mode (page 3-9), and common to both modes (page 3-12) are presented.
Power On Procedure
The Anritsu Site Master is capable of up to 2.5 hours of continuous operation from a fully
charged, field-replaceable battery. Built-in energy conservation features allow battery life to
be extended over an eight-hour workday.
The Site Master can also be operated from a 12.5 Vdc source (which will also simulta
-
neously charge the battery). This can be achieved with either the Anritsu AC-DC Adapter
(P/N 40-115) or 12.5 Vdc Automotive Cigarette Lighter Adapter (P/N 806-62). Both items
are included as standard accessories (see Chapter 1).
To power on the Site Master:
Step 1.
Press the ON/OFF front panel key (Figure 3-1).
The Site Master will display the model number, the firmware revision, the tem
-
perature and voltage, and then perform a five second self-test. At completion of
the self-test, the screen displays a prompt to press ENTER to continue. If enter
is not pressed, the Site Master will continue after a 5 second timeout:
Step 2.
Press ENTER to continue.
The Site Master is now ready for operation.
3-1
3
HOLD
RUN
START
CAL
AUTO
SCALE
SAVE
SETUP
RECALL
SETUP
LIMIT
MARKER
SAVE
DISPLAY
RECALL
DISPLAY
PRINT
MODE
FREQ/DIST
AMPLITUDE
SWEEP
SYS
ENTER
CLEAR
ESCAPE
ON
OFF
/
1
2
4
5
6
7
8
9
0
3
+
-
.
Site Master S332C
ON/OFF
KEY
Figure 3-1. Site Master On/Off Key
- Site Master 1
- S113C, S114C 1
- S331C, and S332C 1
- Antenna, Cable and 1
- Spectrum Analyzer 1
- WARRANTY 3
- LIMITATION OF WARRANTY 3
- TRADEMARK ACKNOWLEDGMENTS 3
- Table of Contents 5
- Chapter 3 - Getting Started 6
- Chapter 6 - Power Measurement 8
- Chapter 7 - Software Tools 8
- Appendix A - Reference Data 8
- Appendix B - Windowing 8
- Chapter 1 9
- General Information 9
- Printers 10
- Optional Accessories 11
- Performance Specifications 12
- Chapter 1 General Information 13
- Preventive Maintenance 14
- Calibration 14
- Annual Verification 15
- ESD Precautions 15
- Chapter 2 17
- Functions and Operations 17
- Front Panel Overview 18
- Function Hard Keys 19
- Keypad Hard Keys 20
- Soft Keys 22
- MODE=DTF: 23
- SOFTKEYS: 23
- FREQ/DIST 23
- AMPLITUDE 23
- MODE=SPECTRUM ANALYZER: 24
- Power Monitor Menu 34
- Self Test 35
- Error Codes 35
- Description 36
- Self Test Error Messages 36
- Range Errors 37
- InstaCal Error Messages 38
- Battery Information 40
- BATTERY INDI 41
- Battery Life 42
- 2-27/2-28 43
- Chapter 3 44
- Getting Started 44
- Site Master Mode 45
- Calibration Verification 46
- Manual Calibration Procedure 47
- InstaCal Module Verification 48
- Site Master S332C 49
- Setting the Scale 50
- Auto Scale 50
- Amplitude Scale 50
- Spectrum Analyzer Mode 52
- Selecting Sweep Parameters 53
- Adjusting Attenuator Settings 54
- Save and Recall a Setup 55
- Save and Recall a Display 55
- Changing the Units 56
- Changing the Display Language 56
- Adjusting Markers 56
- Adjusting Limits 56
- Setting the System Language 58
- Setting the System Impedance 58
- Printing 59
- Printer Switch Settings 60
- Using the Soft Carrying Case 61
- Chapter 4 62
- Cable & Antenna 62
- Measurements 62
- MODE key 64
- Insertion Loss Measurement 65
- ´ Length (ft) = Loss (dB) 66
- Resolution 70
- MARKER key 71
- 4-11/4-12 72
- Chapter 5 73
- AUTO mode, as the 74
- MANUAL) mode, the 74
- AM/FM Modulation 75
- Frequency Modulation 76
- Field Strength Measurements 78
- Creating a Spectral Mask 79
- EDIT and enter the 80
- EDIT when done 80
- Trace Overlay 81
- Occupied Bandwidth 82
- Channel Power Measurement 84
- GSM Channel Power Measurement 84
- Procedure 85
- Adjacent Channel Power Ratio 87
- Measurement Applications 89
- Required Equipment 95
- In-band Spurious Measurement 97
- Field Strength 99
- Antenna Calculations 100
- 5-29/5-30 101
- Power Measurement 102
- Chapter 6 102
- Chapter 7 104
- Software Tools 104
- Installation 105
- Using Software Tools 106
- Plot Capture to the PC 107
- Plot Upload to the Instrument 107
- Plot Properties 107
- Trace Overlay or Plot Overlay 108
- Saving Traces 109
- Creating a Database 110
- Printing Formats 110
- Uploading Antenna Factors 111
- 7-9/7-10 112
- Appendix A 113
- Reference Data 113
- Appendix A Reference Data 114
- Appendix B 116
- Windowing 116
- Appendix B Windowing 117
© 2020, manymanuals.fr. Tous droits réservés | 0.021 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels