Anritsu MG3700A MG3700A Spécifications Page 11

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 104
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 10
Product Brochure
l
MG3700A 11
Software options: IQproducer License
The IQproducer software can be installed on any PC for evaluation
before purchase. To generate RF signals from the waveform
pattern created by the IQproducer software, the MG3700A must be
equipped with a license key for each of the technologies.
Model: MX370101A
Name: HSDPA/HSUPA IQproducer
Parameters can be changed and the required waveform
patterns can be generated for HSDPA Uplink/Downlink and
HSUPA E-DPDCH/EDPCCH.
Model: MX370102A
Name: TDMA IQproducer
Parameters can be changed and the required waveform
patterns can be generated for TDMA system signals. The
parameters that can be set include Modulation, Frame, Slot,
Data, and Filter.
Model: MX370103A
Name: CDMA2000 1xEV-DO IQproducer
Parameters can be changed and the required waveform
patterns can be generated for CDMA2000 1xEV-DO Forward/
Reverse signals.
Model: MX370104A
Name: Multi-carrier IQproducer
The MX370104A Multi-carrier IQproducer software is GUI-
driven PC application software for creating multi-carrier
waveform patterns for the modulation and tone signals of
various communication systems.
There is also a function for converting two waveform patterns
with different sampling rates to a waveform pattern with one
sampling rate, as well as a function for creating a waveform
pattern with W-CDMA Downlink multi-carrier and clipping.
Model: MX370105A
Name: Mobile WiMAX IQproducer
Create UL and DL waveforms that comply with the IEEE
802.16e standard using a drop-and-drag GUI. Use these
files wherever a mobile WiMAX signal is required. Test
receivers per IEEE 802.16e standard section 8.4.13 -
Receiver Requirements (excluding the tests that require test
equipment other than a Signal Generator).
Model: MX370106A
Name: DVB-T/H IQproducer
The parameters for the ETSI EN 300 744 V1.5.1 (2004-11)
Physical Layer specification are set and a waveform pattern
is generated. A video file waveform pattern is generated by
reading the user’s MPEG-2 TS file. The generated
waveform pattern can be used for the receiver sensitivity
test using BER measurement and for the final operation
check using the video.
Model: MX370107A
Name: Fading IQproducer
The MX370107A Fading IQproducer supports generation of
faded waveform patterns (fading of each IQ channel,
calculation of correlation line, addition of AWGN) by reading
waveform patterns for the MG3700A.
Waveform patterns created by another IQproducer or IQ
data (ASCII) created by general simulation tools can be
selected as the input file.
The Channel Configuration can be selected from 1x1 SISO,
2x1 MISO, 1x2 SIMO, and 2x2 MIMO.
Model: MX370108A
Name: LTE IQproducer
The MX370108A LTE IQproducer supports creation of
required waveform patterns by changing parameters
standardized in the 3GPP LTE FDD specifications of 3GPP
TS36.211, TS36.212, and TS25.814.
Model: MX370110A
Name: LTE TDD IQproducer
The MX370110A LTE TDD IQproducer supports creation of
required waveform patterns by changing parameters
standardized in the 3GPP LTE TDD specifications of 3GPP
TS36.211, TS36.212, TS36.213 and TS25.814.
Model: MX370109A
Name: XG-PHS IQproducer
The MX370109A XG-PHS IQproducer supports creation of
required waveform patterns by changing parameters
standardized in the next generation PHS (XGP: eXtended
Global Platform)
Read the MX370x Series Software catalog for details.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
Vue de la page 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 103 104

Commentaires sur ces manuels

Pas de commentaire